Share

New modules for cleaning and laser marking of tools

WALTER presents new modules

Share
WALTER, Cleaning and laser marking of tools, Robot loader, HELICHECK PLUS, HELICHECK PRO, Clean tool, Robot cell

WALTER presents new modules for cleaning and laser marking of tools for application in the robot loader on the measuring machines HELICHECK PLUS and HELICHECK PRO

The use of new modules for cleaning and laser marking of tools in the robot loader further increases flexibility during manufacture and final inspection. The user saves valuable time by automatically loading the measuring machine with the robot loader and concurrently cleaning and laser marking the tools outside of the measuring area.

Tool cleaning module:

A clean tool is essential for a valid measurement of tools. Therefore, the tools are cleaned before measurement in an ultrasonic bath, which is integrated in the robot cell and separate from the measuring area. Tools are subsequently dried in the air stream, which can be adapted individually depending on the tool length.

Laser marking module:

After cleaning and measuring the tool, the high-quality marking of the tool can then be carried out in the laser marking module, also integrated in the robot cell and separate from the measuring area without any penetration. Marking can be made on the shaft and/or tool end face with static or dynamic data.

For complete flexibility, the robot loader for the HELICHECK PLUS and HELICHECK PRO measuring machines can be specified with an individual preparation for these two modules - they can then be individually retrofitted if required.

Newsletter

Most Popular

Digital Edition

july 2020
From the magazine

Subscribe Now